Repair tips for a leaky roof: Here is what you should do

 In Uncategorized

In this modern era, shingles of asphalt are the most prevalent roofing materials for the homes. Some of the significant benefits of asphalt shingles are: durable, lightweight, good looking and low priced compared to the other roofing materials. However, most asphalt shingles are constructed with modern advancements which are highly sustainable to bear all drastic weather conditions. But the fact is that even superior quality of shingles can develop problems after some time.

The good thing here is that the roof made up of asphalt shingles is easiest to fix, since frizzy shingles can be re-secured and flattened and old ones can be conveniently replaced.

Here are some significant tips that can be followed to deal with ruptured shingles:

Safeguarding curled shingles

Curled shingles can be fixed by coating a layer of asphalt roofing cement or finding its alike compounds in tubes for utilizing with a caulk gun. Further you have to apply a substantial amount of roofing cement on the base of the shingle to ensure that the corners and edges are secure. Then, press it tightly to set.

Discovering the leak

In case you find that your roof is leaking- note the leaking spot and then move outside with an efficient binocular. Observe if there are any cracked, curled or lost shingles. Leaks can take place at any spot. Tent shaped shingles, end caps that shelter the angular tops of the roof etc. can also be the reason behind leaks, so don’t forget to check them.

 

cfm roofing

Replacing ruptured or lost shingles

If shingles are ruptured, rotten or lost, substituting them may be a simple alternative of repair. To remove a ruptured shingle, pick the edges of surrounding shingles and cautiously eradicate nails by using a pry bar. Once the nails are eradicated, the shingles would slip out. Then scrap off the residual cement from the roof and eliminate the expanded nails.

Repairing Flashing

To fix leaks originated due to metal flashing around dormers and chimneys, just seal again the joints with a caulk gun of roofing cement. If there is damage to joints earlier sealed by using a line of roof cement, apply a novel coat by using a putty knife.

If it’s essential to change complete row of shingles or if you observe shingles lift away from the roof very conveniently, then you should call a professional roofing contractor to analyze the condition of your roof and deliver quality roofing services if needed.

 

Recommended Posts

Leave a Comment